"""
mflpf module. Contains the ModflowLpf class. Note that the user can access
the ModflowLpf class as `flopy.modflow.ModflowLpf`.
Additional information for this MODFLOW package can be found at the `Online
MODFLOW Guide
<http://water.usgs.gov/ogw/modflow/MODFLOW-2005-Guide/index.html?lpf.htm>`_.
"""
import numpy as np
from ..pakbase import Package
from ..utils import Util2d, Util3d, read1d
from ..utils.flopy_io import line_parse
from .mfpar import ModflowPar as mfpar
[docs]class ModflowLpf(Package):
"""
MODFLOW Layer Property Flow Package Class.
Parameters
----------
model : model object
The model object (of type :class:`flopy.modflow.mf.Modflow`) to which
this package will be added.
ipakcb : int
A flag that is used to determine if cell-by-cell budget data should be
saved. If ipakcb is non-zero cell-by-cell budget data will be saved.
(default is 0)
hdry : float
Is the head that is assigned to cells that are converted to dry during
a simulation. Although this value plays no role in the model
calculations, it is useful as an indicator when looking at the
resulting heads that are output from the model. HDRY is thus similar
to HNOFLO in the Basic Package, which is the value assigned to cells
that are no-flow cells at the start of a model simulation.
(default is -1.e30).
laytyp : int or array of ints (nlay)
Layer type, contains a flag for each layer that specifies the layer
type.
0 confined
>0 convertible
<0 convertible unless the THICKSTRT option is in effect.
(default is 0).
layavg : int or array of ints (nlay)
Layer average
0 is harmonic mean
1 is logarithmic mean
2 is arithmetic mean of saturated thickness and logarithmic mean of
of hydraulic conductivity
(default is 0).
chani : float or array of floats (nlay)
contains a value for each layer that is a flag or the horizontal
anisotropy. If CHANI is less than or equal to 0, then variable HANI
defines horizontal anisotropy. If CHANI is greater than 0, then CHANI
is the horizontal anisotropy for the entire layer, and HANI is not
read. If any HANI parameters are used, CHANI for all layers must be
less than or equal to 0. Use as many records as needed to enter a
value of CHANI for each layer. The horizontal anisotropy is the ratio
of the hydraulic conductivity along columns (the Y direction) to the
hydraulic conductivity along rows (the X direction).
(default is 1).
layvka : int or array of ints (nlay)
a flag for each layer that indicates whether variable VKA is vertical
hydraulic conductivity or the ratio of horizontal to vertical
hydraulic conductivity.
0: VKA is vertical hydraulic conductivity
not 0: VKA is the ratio of horizontal to vertical hydraulic conductivity
(default is 0).
laywet : int or array of ints (nlay)
contains a flag for each layer that indicates if wetting is active.
0 wetting is inactive
not 0 wetting is active
(default is 0).
wetfct : float
is a factor that is included in the calculation of the head that is
initially established at a cell when it is converted from dry to wet.
(default is 0.1).
iwetit : int
is the iteration interval for attempting to wet cells. Wetting is
attempted every IWETIT iteration. If using the PCG solver
(Hill, 1990), this applies to outer iterations, not inner iterations.
If IWETIT less than or equal to 0, it is changed to 1.
(default is 1).
ihdwet : int
is a flag that determines which equation is used to define the
initial head at cells that become wet.
(default is 0)
hk : float or array of floats (nlay, nrow, ncol)
is the hydraulic conductivity along rows. HK is multiplied by
horizontal anisotropy (see CHANI and HANI) to obtain hydraulic
conductivity along columns.
(default is 1.0).
hani : float or array of floats (nlay, nrow, ncol)
is the ratio of hydraulic conductivity along columns to hydraulic
conductivity along rows, where HK of item 10 specifies the hydraulic
conductivity along rows. Thus, the hydraulic conductivity along
columns is the product of the values in HK and HANI.
(default is 1.0).
vka : float or array of floats (nlay, nrow, ncol)
is either vertical hydraulic conductivity or the ratio of horizontal
to vertical hydraulic conductivity depending on the value of LAYVKA.
(default is 1.0).
ss : float or array of floats (nlay, nrow, ncol)
is specific storage unless the STORAGECOEFFICIENT option is used.
When STORAGECOEFFICIENT is used, Ss is confined storage coefficient.
(default is 1.e-5).
sy : float or array of floats (nlay, nrow, ncol)
is specific yield.
(default is 0.15).
vkcb : float or array of floats (nlay, nrow, ncol)
is the vertical hydraulic conductivity of a Quasi-three-dimensional
confining bed below a layer. (default is 0.0). Note that if an array
is passed for vkcb it must be of size (nlay, nrow, ncol) even though
the information for the bottom layer is not needed.
wetdry : float or array of floats (nlay, nrow, ncol)
is a combination of the wetting threshold and a flag to indicate
which neighboring cells can cause a cell to become wet.
(default is -0.01).
storagecoefficient : boolean
indicates that variable Ss and SS parameters are read as storage
coefficient rather than specific storage.
(default is False).
constantcv : boolean
indicates that vertical conductance for an unconfined cell is
computed from the cell thickness rather than the saturated thickness.
The CONSTANTCV option automatically invokes the NOCVCORRECTION
option. (default is False).
thickstrt : boolean
indicates that layers having a negative LAYTYP are confined, and their
cell thickness for conductance calculations will be computed as
STRT-BOT rather than TOP-BOT. (default is False).
nocvcorrection : boolean
indicates that vertical conductance is not corrected when the vertical
flow correction is applied. (default is False).
novfc : boolean
turns off the vertical flow correction under dewatered conditions.
This option turns off the vertical flow calculation described on p.
5-8 of USGS Techniques and Methods Report 6-A16 and the vertical
conductance correction described on p. 5-18 of that report.
(default is False).
extension : string
Filename extension (default is 'lpf')
unitnumber : int
File unit number (default is None).
filenames : str or list of str
Filenames to use for the package and the output files. If
filenames=None the package name will be created using the model name
and package extension and the cbc output name will be created using
the model name and .cbc extension (for example, modflowtest.cbc),
if ipakcbc is a number greater than zero. If a single string is passed
the package will be set to the string and cbc output name will be
created using the model name and .cbc extension, if ipakcbc is a
number greater than zero. To define the names for all package files
(input and output) the length of the list of strings should be 2.
Default is None.
add_package : bool
Flag to add the initialised package object to the parent model object.
Default is True.
Attributes
----------
Methods
-------
See Also
--------
Notes
-----
Examples
--------
>>> import flopy
>>> m = flopy.modflow.Modflow()
>>> lpf = flopy.modflow.ModflowLpf(m)
"""
"Layer-property flow package class\n"
def __init__(
self,
model,
laytyp=0,
layavg=0,
chani=1.0,
layvka=0,
laywet=0,
ipakcb=None,
hdry=-1e30,
iwdflg=0,
wetfct=0.1,
iwetit=1,
ihdwet=0,
hk=1.0,
hani=1.0,
vka=1.0,
ss=1e-5,
sy=0.15,
vkcb=0.0,
wetdry=-0.01,
storagecoefficient=False,
constantcv=False,
thickstrt=False,
nocvcorrection=False,
novfc=False,
extension="lpf",
unitnumber=None,
filenames=None,
add_package=True,
):
# set default unit number of one is not specified
if unitnumber is None:
unitnumber = ModflowLpf._defaultunit()
# set filenames
filenames = self._prepare_filenames(filenames, 2)
# update external file information with cbc output, if necessary
if ipakcb is not None:
model.add_output_file(
ipakcb, fname=filenames[1], package=self._ftype()
)
else:
ipakcb = 0
# call base package constructor
super().__init__(
model,
extension=extension,
name=self._ftype(),
unit_number=unitnumber,
filenames=filenames[0],
)
self._generate_heading()
self.url = "lpf.htm"
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
# item 1
self.ipakcb = ipakcb
self.hdry = (
hdry # Head in cells that are converted to dry during a simulation
)
self.nplpf = 0 # number of LPF parameters
self.ikcflag = 0 # 1 and -1 are not supported.
self.laytyp = Util2d(model, (nlay,), np.int32, laytyp, name="laytyp")
self.layavg = Util2d(model, (nlay,), np.int32, layavg, name="layavg")
self.chani = Util2d(model, (nlay,), np.float32, chani, name="chani")
self.layvka = Util2d(model, (nlay,), np.int32, layvka, name="layvka")
self.laywet = Util2d(model, (nlay,), np.int32, laywet, name="laywet")
# Factor that is included in the calculation of the head when a cell is
# converted from dry to wet
self.wetfct = wetfct
# Iteration interval for attempting to wet cells
self.iwetit = iwetit
# Flag that determines which equation is used to define the initial
# head at cells that become wet
self.ihdwet = ihdwet
self.options = " "
if storagecoefficient:
self.options = self.options + "STORAGECOEFFICIENT "
if constantcv:
self.options = self.options + "CONSTANTCV "
if thickstrt:
self.options = self.options + "THICKSTRT "
if nocvcorrection:
self.options = self.options + "NOCVCORRECTION "
if novfc:
self.options = self.options + "NOVFC "
self.hk = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
hk,
name="hk",
locat=self.unit_number[0],
)
self.hani = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
hani,
name="hani",
locat=self.unit_number[0],
)
keys = []
for k in range(nlay):
key = "vka"
if self.layvka[k] != 0:
key = "vani"
keys.append(key)
self.vka = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
vka,
name=keys,
locat=self.unit_number[0],
)
tag = "ss"
if storagecoefficient:
tag = "storage"
self.ss = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
ss,
name=tag,
locat=self.unit_number[0],
)
self.sy = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
sy,
name="sy",
locat=self.unit_number[0],
)
self.vkcb = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
vkcb,
name="vkcb",
locat=self.unit_number[0],
)
self.wetdry = Util3d(
model,
(nlay, nrow, ncol),
np.float32,
wetdry,
name="wetdry",
locat=self.unit_number[0],
)
if add_package:
self.parent.add_package(self)
return
[docs] def write_file(self, check=True, f=None):
"""
Write the package file.
Parameters
----------
check : boolean
Check package data for common errors. (default True)
Returns
-------
None
"""
# allows turning off package checks when writing files at model level
if check:
self.check(
f=f"{self.name[0]}.chk",
verbose=self.parent.verbose,
level=1,
)
# get model information
nrow, ncol, nlay, nper = self.parent.nrow_ncol_nlay_nper
dis = self.parent.get_package("DIS")
if dis is None:
dis = self.parent.get_package("DISU")
# Open file for writing
if f is None:
f = open(self.fn_path, "w")
# Item 0: text
f.write(f"{self.heading}\n")
# Item 1: IBCFCB, HDRY, NPLPF, <IKCFLAG>, OPTIONS
if self.parent.version == "mfusg" and self.parent.structured == False:
f.write(
"{0:10d}{1:10.6G}{2:10d}{3:10d} {4:s}\n".format(
self.ipakcb,
self.hdry,
self.nplpf,
self.ikcflag,
self.options,
)
)
else:
f.write(
f"{self.ipakcb:10d}{self.hdry:10.6G}{self.nplpf:10d} {self.options}\n"
)
# LAYTYP array
f.write(self.laytyp.string)
# LAYAVG array
f.write(self.layavg.string)
# CHANI array
f.write(self.chani.string)
# LAYVKA array
f.write(self.layvka.string)
# LAYWET array
f.write(self.laywet.string)
# Item 7: WETFCT, IWETIT, IHDWET
iwetdry = self.laywet.sum()
if iwetdry > 0:
f.write(f"{self.wetfct:10f}{self.iwetit:10d}{self.ihdwet:10d}\n")
transient = not dis.steady.all()
for k in range(nlay):
f.write(self.hk[k].get_file_entry())
if self.chani[k] <= 0.0:
f.write(self.hani[k].get_file_entry())
f.write(self.vka[k].get_file_entry())
if transient == True:
f.write(self.ss[k].get_file_entry())
if self.laytyp[k] != 0:
f.write(self.sy[k].get_file_entry())
if dis.laycbd[k] > 0:
f.write(self.vkcb[k].get_file_entry())
if self.laywet[k] != 0 and self.laytyp[k] != 0:
f.write(self.wetdry[k].get_file_entry())
f.close()
return
[docs] @classmethod
def load(cls, f, model, ext_unit_dict=None, check=True):
"""
Load an existing package.
Parameters
----------
f : filename or file handle
File to load.
model : model object
The model object (of type :class:`flopy.modflow.mf.Modflow`) to
which this package will be added.
ext_unit_dict : dictionary, optional
If the arrays in the file are specified using EXTERNAL,
or older style array control records, then `f` should be a file
handle. In this case ext_unit_dict is required, which can be
constructed using the function
:class:`flopy.utils.mfreadnam.parsenamefile`.
check : boolean
Check package data for common errors. (default True)
Returns
-------
lpf : ModflowLpf object
ModflowLpf object.
Examples
--------
>>> import flopy
>>> m = flopy.modflow.Modflow()
>>> lpf = flopy.modflow.ModflowLpf.load('test.lpf', m)
"""
if model.verbose:
print("loading lpf package file...")
openfile = not hasattr(f, "read")
if openfile:
filename = f
f = open(filename, "r")
# dataset 0 -- header
while True:
line = f.readline()
if line[0] != "#":
break
# determine problem dimensions
nr, nc, nlay, nper = model.get_nrow_ncol_nlay_nper()
dis = model.get_package("DIS")
if dis is None:
dis = model.get_package("DISU")
# Item 1: IBCFCB, HDRY, NPLPF - line already read above
if model.verbose:
print(" loading IBCFCB, HDRY, NPLPF...")
t = line_parse(line)
ipakcb, hdry, nplpf = int(t[0]), float(t[1]), int(t[2])
item1_len = 3
if model.version == "mfusg" and model.structured == False:
ikcflag = int(t[3])
item1_len = 4
# if ipakcb != 0:
# model.add_pop_key_list(ipakcb)
# ipakcb = 53
# options
storagecoefficient = False
constantcv = False
thickstrt = False
nocvcorrection = False
novfc = False
if len(t) > item1_len:
for k in range(item1_len, len(t)):
if "STORAGECOEFFICIENT" in t[k].upper():
storagecoefficient = True
if "CONSTANTCV" in t[k].upper():
constantcv = True
if "THICKSTRT" in t[k].upper():
thickstrt = True
if "NOCVCORRECTION" in t[k].upper():
nocvcorrection = True
if "NOVFC" in t[k].upper():
novfc = True
# LAYTYP array
if model.verbose:
print(" loading LAYTYP...")
laytyp = np.empty((nlay), dtype=np.int32)
laytyp = read1d(f, laytyp)
# LAYAVG array
if model.verbose:
print(" loading LAYAVG...")
layavg = np.empty((nlay), dtype=np.int32)
layavg = read1d(f, layavg)
# CHANI array
if model.verbose:
print(" loading CHANI...")
chani = np.empty((nlay), dtype=np.float32)
chani = read1d(f, chani)
# LAYVKA array
if model.verbose:
print(" loading LAYVKA...")
layvka = np.empty((nlay,), dtype=np.int32)
layvka = read1d(f, layvka)
# LAYWET array
if model.verbose:
print(" loading LAYWET...")
laywet = np.empty((nlay), dtype=np.int32)
laywet = read1d(f, laywet)
# Item 7: WETFCT, IWETIT, IHDWET
wetfct, iwetit, ihdwet = None, None, None
iwetdry = laywet.sum()
if iwetdry > 0:
if model.verbose:
print(" loading WETFCT, IWETIT, IHDWET...")
line = f.readline()
t = line.strip().split()
wetfct, iwetit, ihdwet = float(t[0]), int(t[1]), int(t[2])
# parameters data
par_types = []
if nplpf > 0:
par_types, parm_dict = mfpar.load(f, nplpf, model.verbose)
# print parm_dict
# non-parameter data
transient = not dis.steady.all()
hk = [0] * nlay
hani = [0] * nlay
vka = [0] * nlay
ss = [0] * nlay
sy = [0] * nlay
vkcb = [0] * nlay
wetdry = [0] * nlay
# load by layer
for k in range(nlay):
# allow for unstructured changing nodes per layer
if nr is None:
nrow = 1
ncol = nc[k]
else:
nrow = nr
ncol = nc
# hk
if model.verbose:
print(f" loading hk layer {k + 1:3d}...")
if "hk" not in par_types:
t = Util2d.load(
f, model, (nrow, ncol), np.float32, "hk", ext_unit_dict
)
else:
line = f.readline()
t = mfpar.parameter_fill(
model, (nrow, ncol), "hk", parm_dict, findlayer=k
)
hk[k] = t
# hani
if chani[k] <= 0.0:
if model.verbose:
print(f" loading hani layer {k + 1:3d}...")
if "hani" not in par_types:
t = Util2d.load(
f,
model,
(nrow, ncol),
np.float32,
"hani",
ext_unit_dict,
)
else:
line = f.readline()
t = mfpar.parameter_fill(
model, (nrow, ncol), "hani", parm_dict, findlayer=k
)
hani[k] = t
# vka
if model.verbose:
print(f" loading vka layer {k + 1:3d}...")
key = "vk"
if layvka[k] != 0:
key = "vani"
if "vk" not in par_types and "vani" not in par_types:
t = Util2d.load(
f, model, (nrow, ncol), np.float32, key, ext_unit_dict
)
else:
line = f.readline()
key = "vk"
if "vani" in par_types:
key = "vani"
t = mfpar.parameter_fill(
model, (nrow, ncol), key, parm_dict, findlayer=k
)
vka[k] = t
# storage properties
if transient:
# ss
if model.verbose:
print(f" loading ss layer {k + 1:3d}...")
if "ss" not in par_types:
t = Util2d.load(
f, model, (nrow, ncol), np.float32, "ss", ext_unit_dict
)
else:
line = f.readline()
t = mfpar.parameter_fill(
model, (nrow, ncol), "ss", parm_dict, findlayer=k
)
ss[k] = t
# sy
if laytyp[k] != 0:
if model.verbose:
print(f" loading sy layer {k + 1:3d}...")
if "sy" not in par_types:
t = Util2d.load(
f,
model,
(nrow, ncol),
np.float32,
"sy",
ext_unit_dict,
)
else:
line = f.readline()
t = mfpar.parameter_fill(
model, (nrow, ncol), "sy", parm_dict, findlayer=k
)
sy[k] = t
# vkcb
if dis.laycbd[k] > 0:
if model.verbose:
print(f" loading vkcb layer {k + 1:3d}...")
if "vkcb" not in par_types:
t = Util2d.load(
f,
model,
(nrow, ncol),
np.float32,
"vkcb",
ext_unit_dict,
)
else:
line = f.readline()
t = mfpar.parameter_fill(
model, (nrow, ncol), "vkcb", parm_dict, findlayer=k
)
vkcb[k] = t
# wetdry
if laywet[k] != 0 and laytyp[k] != 0:
if model.verbose:
print(f" loading wetdry layer {k + 1:3d}...")
t = Util2d.load(
f, model, (nrow, ncol), np.float32, "wetdry", ext_unit_dict
)
wetdry[k] = t
if openfile:
f.close()
# set package unit number
unitnumber = None
filenames = [None, None]
if ext_unit_dict is not None:
unitnumber, filenames[0] = model.get_ext_dict_attr(
ext_unit_dict, filetype=ModflowLpf._ftype()
)
if ipakcb > 0:
iu, filenames[1] = model.get_ext_dict_attr(
ext_unit_dict, unit=ipakcb
)
model.add_pop_key_list(ipakcb)
# create instance of lpf class
lpf = cls(
model,
ipakcb=ipakcb,
laytyp=laytyp,
layavg=layavg,
chani=chani,
layvka=layvka,
laywet=laywet,
hdry=hdry,
iwdflg=iwetdry,
wetfct=wetfct,
iwetit=iwetit,
ihdwet=ihdwet,
hk=hk,
hani=hani,
vka=vka,
ss=ss,
sy=sy,
vkcb=vkcb,
wetdry=wetdry,
storagecoefficient=storagecoefficient,
constantcv=constantcv,
thickstrt=thickstrt,
novfc=novfc,
nocvcorrection=nocvcorrection,
unitnumber=unitnumber,
filenames=filenames,
)
if check:
lpf.check(
f=f"{lpf.name[0]}.chk",
verbose=lpf.parent.verbose,
level=0,
)
return lpf
@staticmethod
def _ftype():
return "LPF"
@staticmethod
def _defaultunit():
return 15