"""
mtbtn module. Contains the Mt3dBtn class. Note that the user can access
the Mt3dBtn class as `flopy.mt3d.Mt3dBtn`.
Additional information for this MT3DMS package can be found in the MT3DMS
User's Manual.
"""
import warnings
import numpy as np
from ..pakbase import Package
from ..utils import Util2d, Util3d
[docs]class Mt3dBtn(Package):
"""
Basic Transport Package Class.
Parameters
----------
model : model object
The model object (of type :class:`flopy.mt3dms.mt.Mt3dms`) to which
this package will be added.
MFStyleArr : str
Specifies whether or not to read arrays using the MODFLOW array reader
format or the original MT3DMS array reader
DRYCell : str
Specifies whether or not to route mass through dry cells. When MF-NWT
is used to generate the flow-transport link file, this is a distinct
possibility.
Legacy99Stor : str
Specifies whether or not to use the storage formulation used in MT3DMS
FTLPrint : str
Specifies if flow-transport link terms (cell-by-cell flows) should be
echoed to the MT3D-USGS listing file.
NoWetDryPrint : str
Specifies whether or not to suppress wet/dry messaging in the MT3D-USGS
listing file.
OmitDryBudg : str
Specifies whether or not to include the mass flux terms through dry
cells in the mass budget written to the listing file.
AltWTSorb : str
Specifies whether or not to use the MT3DMS formulation (this keyword
omitted) for the solid phase, whereby the entire cell thickness is
available for interacting with the aqueous phase, even though the
aqueous phase may only occupy a portion of the cell's thickness. When
used, only the saturated portion of the cell is available for sorbing
ncomp : int
The total number of chemical species in the simulation. (default is
None, will be changed to 1 if sconc is single value)
mcomp : int
The total number of 'mobile' species (default is 1). mcomp must be
equal or less than ncomp.
tunit : str
The name of unit for time (default is 'D', for 'days'). Used for
identification purposes only.
lunit : str
The name of unit for length (default is 'M', for 'meters'). Used for
identification purposes only.
munit : str
The name of unit for mass (default is 'KG', for 'kilograms'). Used for
identification purposes only.
prsity : float or array of floats (nlay, nrow, ncol)
The effective porosity of the porous medium in a single porosity
system, or the mobile porosity in a dual-porosity medium (the immobile
porosity is defined through the Chemical Reaction Package. (default is
0.25).
icbund : int or array of ints (nlay, nrow, ncol)
The icbund array specifies the boundary condition type for solute
species (shared by all species). If icbund = 0, the cell is an inactive
concentration cell; If icbund < 0, the cell is a constant-concentration
cell; If icbund > 0, the cell is an active concentration cell where the
concentration value will be calculated. (default is 1).
sconc : float, array of (nlay, nrow, ncol), or filename
sconc is the starting concentration for the first species. To specify
starting concentrations for other species in a multi-species
simulation, include additional keywords, such as sconc2, sconc3, and
so forth.
cinact : float
The value for indicating an inactive concentration cell. (default is
1e30).
thkmin : float
The minimum saturated thickness in a cell, expressed as the decimal
fraction of its thickness, below which the cell is considered inactive.
(default is 0.01).
ifmtcn : int
A flag/format code indicating how the calculated concentration should
be printed to the standard output text file. Format codes for printing
are listed in Table 3 of the MT3DMS manual. If ifmtcn > 0 printing is
in wrap form; ifmtcn < 0 printing is in strip form; if ifmtcn = 0
concentrations are not printed. (default is 0).
ifmtnp : int
A flag/format code indicating how the number of particles should
be printed to the standard output text file. The convention is
the same as for ifmtcn. (default is 0).
ifmtrf : int
A flag/format code indicating how the calculated retardation factor
should be printed to the standard output text file. The convention is
the same as for ifmtcn. (default is 0).
ifmtdp : int
A flag/format code indicating how the distance-weighted dispersion
coefficient should be printed to the standard output text file. The
convention is the same as for ifmtcn. (default is 0).
savucn : bool
A logical flag indicating whether the concentration solution should be
saved in an unformatted file. (default is True).
nprs : int
A flag indicating (i) the frequency of the output and
(ii) whether the output frequency is specified in terms
of total elapsed simulation time or the transport step number. If
nprs > 0 results will be saved at the times as specified in timprs;
if nprs = 0, results will not be saved except at the end of simulation;
if NPRS < 0, simulation results will be saved whenever the number of
transport steps is an even multiple of nprs. (default is 0).
timprs : list of floats
The total elapsed time at which the simulation results are saved. The
number of entries in timprs must equal nprs. (default is None).
obs: array of int
An array with the cell indices (layer, row, column) for which the
concentration is to be printed at every transport step. (default is
None). obs indices must be entered as zero-based numbers as a 1 is
added to them before writing to the btn file.
nprobs: int
An integer indicating how frequently the concentration at the specified
observation points should be saved. (default is 1).
chkmas: bool
A logical flag indicating whether a one-line summary of mass balance
information should be printed. (default is True).
nprmas: int
An integer indicating how frequently the mass budget information
should be saved. (default is 1).
dt0: float
The user-specified initial transport step size within each time-step
of the flow solution. (default is 0).
mxstrn: int
The maximum number of transport steps allowed within one time step
of the flow solution. (default is 50000).
ttsmult: float
The multiplier for successive transport steps within a flow time-step
if the GCG solver is used and the solution option for the advection
term is the standard finite-difference method. (default is 1.0).
ttsmax: float
The maximum transport step size allowed when transport step size
multiplier TTSMULT > 1.0. (default is 0).
species_names: list of str
A list of names for every species in the simulation.
extension : string
Filename extension (default is 'btn')
unitnumber : int
File unit number (default is None).
filenames : str or list of str
Filenames to use for the package. If filenames=None the package name
will be created using the model name and package extension. If a
single string is passed the package will be set to the string.
Default is None.
Attributes
----------
Methods
-------
See Also
--------
Notes
-----
Examples
--------
>>> import flopy
>>> mt = flopy.mt3dms.Mt3dms()
>>> btn = flopy.mt3dms.Mt3dBtn(mt)
"""
def __init__(
self,
model,
MFStyleArr=False,
DRYCell=False,
Legacy99Stor=False,
FTLPrint=False,
NoWetDryPrint=False,
OmitDryBud=False,
AltWTSorb=False,
nlay=None,
nrow=None,
ncol=None,
nper=None,
ncomp=1,
mcomp=1,
tunit="D",
lunit="M",
munit="KG",
laycon=None,
delr=None,
delc=None,
htop=None,
dz=None,
prsity=0.30,
icbund=1,
sconc=0.0,
cinact=1e30,
thkmin=0.01,
ifmtcn=0,
ifmtnp=0,
ifmtrf=0,
ifmtdp=0,
savucn=True,
nprs=0,
timprs=None,
obs=None,
nprobs=1,
chkmas=True,
nprmas=1,
perlen=None,
nstp=None,
tsmult=None,
ssflag=None,
dt0=0,
mxstrn=50000,
ttsmult=1.0,
ttsmax=0,
species_names=None,
extension="btn",
unitnumber=None,
filenames=None,
**kwargs,
):
if unitnumber is None:
unitnumber = Mt3dBtn._defaultunit()
elif unitnumber == 0:
unitnumber = Mt3dBtn._reservedunit()
# call base package constructor
super().__init__(
model,
extension=extension,
name=self._ftype(),
unit_number=unitnumber,
filenames=self._prepare_filenames(filenames),
)
# Set these variables from the Modflow model (self.parent.mf) unless
# they are specified in the constructor.
self.setmodflowvars(
nlay,
nrow,
ncol,
nper,
laycon,
delr,
delc,
htop,
dz,
perlen,
nstp,
tsmult,
)
# Make the rest of the assignments
self.heading1 = "# BTN for MT3DMS, generated by Flopy."
self.heading2 = "#"
self.MFStyleArr = MFStyleArr
if self.MFStyleArr:
model.free_format = True
model.array_format = None
self.DRYCell = DRYCell
self.Legacy99Stor = Legacy99Stor
self.FTLPrint = FTLPrint
self.NoWetDryPrint = NoWetDryPrint
self.OmitDryBud = OmitDryBud
self.AltWTSorb = AltWTSorb
self.ncomp = ncomp
self.mcomp = mcomp
self.tunit = tunit
self.lunit = lunit
self.munit = munit
self.cinact = cinact
self.thkmin = thkmin
self.ifmtcn = ifmtcn
self.ifmtnp = ifmtnp
self.ifmtrf = ifmtrf
self.ifmtdp = ifmtdp
self.savucn = savucn
self.nprs = nprs
self.timprs = timprs
if obs is not None:
if isinstance(obs, list):
obs = np.array(obs)
if obs.ndim != 2:
raise Exception(
"obs must be (or be convertible to) a 2d array"
)
self.obs = obs
self.nprobs = nprobs
self.chkmas = chkmas
self.nprmas = nprmas
if species_names is None:
species_names = []
self.species_names = species_names
self.prsity = Util3d(
model,
(self.nlay, self.nrow, self.ncol),
np.float32,
prsity,
name="prsity",
locat=self.unit_number[0],
array_free_format=False,
)
self.icbund = Util3d(
model,
(self.nlay, self.nrow, self.ncol),
np.int32,
icbund,
name="icbund",
locat=self.unit_number[0],
array_free_format=False,
)
self.ssflag = ssflag
self.dt0 = Util2d(
model,
(self.nper,),
np.float32,
dt0,
name="dt0",
array_free_format=False,
)
self.mxstrn = Util2d(
model, (self.nper,), np.int32, mxstrn, name="mxstrn"
)
self.ttsmult = Util2d(
model, (self.nper,), np.float32, ttsmult, name="ttmult"
)
self.ttsmax = Util2d(
model, (self.nper,), np.float32, ttsmax, name="ttsmax"
)
# Do some fancy stuff for multi-species concentrations
self.sconc = []
u3d = Util3d(
model,
(self.nlay, self.nrow, self.ncol),
np.float32,
sconc,
name="sconc1",
locat=self.unit_number[0],
array_free_format=False,
)
self.sconc.append(u3d)
if ncomp > 1:
for icomp in range(2, ncomp + 1):
name = f"sconc{icomp}"
val = 0.0
if name in kwargs:
val = kwargs.pop(name)
else:
print(
f"BTN: setting sconc for component {icomp} "
f"to zero, kwarg name {name}"
)
u3d = Util3d(
model,
(self.nlay, self.nrow, self.ncol),
np.float32,
val,
name=name,
locat=self.unit_number[0],
array_free_format=False,
)
self.sconc.append(u3d)
# Check to make sure that all kwargs have been consumed
if len(list(kwargs.keys())) > 0:
raise Exception(
f"BTN error: unrecognized kwargs: {' '.join(list(kwargs.keys()))}"
)
# Finally add self to parent's package list and return
self.parent.add_package(self)
return
[docs] def setmodflowvars(
self,
nlay,
nrow,
ncol,
nper,
laycon,
delr,
delc,
htop,
dz,
perlen,
nstp,
tsmult,
):
"""
Set these variables from the MODFLOW model, if it exists
"""
# Members that may come from a modflow model (model.mf)
validmfdis = True
try:
dum = self.parent.mf.dis.nlay
mf = self.parent.mf
except:
validmfdis = False
mfvarlist = [
nlay,
nrow,
ncol,
nper,
laycon,
delr,
delc,
htop,
dz,
perlen,
nstp,
tsmult,
]
if not validmfdis:
for v in mfvarlist:
s = "BTN error. Required input is None, but no modflow model."
s += " If no modflow model is passed to Mt3dms, then values "
s += "must be specified in the BTN constructor for: "
s += "nlay, nrow, ncol, nper, laycon, delr, delc, htop, dz, "
s += "perlen, nstp, and tsmult."
if v is None:
raise Exception(s)
if nlay is not None:
self.nlay = nlay
else:
self.nlay = mf.dis.nlay
if nrow is not None:
self.nrow = nrow
else:
self.nrow = mf.dis.nrow
if ncol is not None:
self.ncol = ncol
else:
self.ncol = mf.dis.ncol
if nper is not None:
self.nper = nper
else:
self.nper = mf.dis.nper
nlay = self.nlay
nrow = self.nrow
ncol = self.ncol
nper = self.nper
if delr is not None:
self.delr = Util2d(
self.parent,
(ncol,),
np.float32,
delr,
name="delr",
locat=self.unit_number[0],
array_free_format=False,
)
else:
self.delr = Util2d(
self.parent,
(ncol,),
np.float32,
mf.dis.delr.get_value(),
name="delr",
locat=self.unit_number[0],
array_free_format=False,
)
if delc is not None:
self.delc = Util2d(
self.parent,
(nrow,),
np.float32,
delc,
name="delc",
locat=self.unit_number[0],
)
else:
self.delc = Util2d(
self.parent,
(nrow,),
np.float32,
mf.dis.delc.get_value(),
name="delc",
locat=self.unit_number[0],
array_free_format=False,
)
if htop is not None:
self.htop = Util2d(
self.parent,
(nrow, ncol),
np.float32,
htop,
name="htop",
locat=self.unit_number[0],
array_free_format=False,
)
else:
self.htop = Util2d(
self.parent,
(nrow, ncol),
np.float32,
mf.dis.top.get_value(),
name="htop",
locat=self.unit_number[0],
array_free_format=False,
)
if dz is not None:
self.dz = Util3d(
self.parent,
(nlay, nrow, ncol),
np.float32,
dz,
name="dz",
locat=self.unit_number[0],
array_free_format=False,
)
else:
thickness = mf.modelgrid.thick
self.dz = Util3d(
self.parent,
(nlay, nrow, ncol),
np.float32,
thickness,
name="dz",
locat=self.unit_number[0],
array_free_format=False,
)
if perlen is not None:
self.perlen = Util2d(
self.parent,
(nper,),
np.float32,
perlen,
name="perlen",
locat=self.unit_number[0],
)
else:
self.perlen = Util2d(
self.parent,
(nper,),
np.float32,
mf.dis.perlen.get_value(),
name="perlen",
locat=self.unit_number[0],
)
if nstp is not None:
self.nstp = Util2d(
self.parent,
(nper,),
np.int32,
nstp,
name="nstp",
locat=self.unit_number[0],
)
else:
self.nstp = Util2d(
self.parent,
(nper,),
np.int32,
mf.dis.nstp.get_value(),
name="nstp",
locat=self.unit_number[0],
)
if tsmult is not None:
self.tsmult = Util2d(
self.parent,
(nper,),
np.float32,
tsmult,
name="tsmult",
locat=self.unit_number[0],
)
else:
self.tsmult = Util2d(
self.parent,
(nper,),
np.float32,
mf.dis.tsmult.get_value(),
name="tsmult",
locat=self.unit_number[0],
)
self.laycon = None
if laycon is not None:
self.laycon = Util2d(
self.parent,
(nlay,),
np.int32,
laycon,
name="laycon",
locat=self.unit_number[0],
)
else:
flow_package = mf.get_package("BCF6")
if flow_package is not None:
self.laycon = Util2d(
self.parent,
(nlay,),
np.int32,
flow_package.laycon.get_value(),
name="laycon",
locat=self.unit_number[0],
)
else:
flow_package = mf.get_package("LPF")
if flow_package is not None:
self.laycon = Util2d(
self.parent,
(nlay,),
np.int32,
flow_package.laytyp.get_value(),
name="laycon",
locat=self.unit_number[0],
)
flow_package = mf.get_package("UPW")
if flow_package is not None:
self.laycon = Util2d(
self.parent,
(nlay,),
np.int32,
flow_package.laytyp.get_value(),
name="laycon",
locat=self.unit_number[0],
)
s = "BTN warning. Laycon has not been set. A modflow model with a "
s += " BCF or LPF package does not exist and laycon was not passed "
s += " to the BTN constructor. Setting laycon to 1 (convertible)."
if self.laycon is None:
warnings.warn(s)
self.laycon = Util2d(
self.parent,
(nlay,),
np.int32,
1,
name="laycon",
locat=self.unit_number[0],
)
return
[docs] def write_file(self):
"""
Write the package file
Returns
-------
None
"""
# Open file for writing
f_btn = open(self.fn_path, "w")
# A1,2
f_btn.write(f"#{self.heading1}\n#{self.heading2}\n")
# A3; Keywords
# Build a string of the active keywords
str1 = ""
if self.MFStyleArr:
str1 += " MODFLOWSTYLEARRAYS"
if self.DRYCell:
str1 += " DRYCELL"
if self.Legacy99Stor:
str1 += " LEGACY99STORAGE"
if self.FTLPrint:
str1 += " FTLPRINT"
if self.NoWetDryPrint:
str1 += " NOWETDRYPRINT"
if self.OmitDryBud:
str1 += " OMITDRYCELLBUDGET"
if self.AltWTSorb:
str1 += " ALTWTSORB"
if str1 != "":
f_btn.write(str1 + "\n")
# A3
f_btn.write(
"{0:10d}{1:10d}{2:10d}{3:10d}{4:10d}{5:10d}\n".format(
self.nlay,
self.nrow,
self.ncol,
self.nper,
self.ncomp,
self.mcomp,
)
)
# A4
f_btn.write(f"{self.tunit:4s}{self.lunit:4s}{self.munit:4s}\n")
# A5
if self.parent.adv != None:
f_btn.write("{0:2s}".format("T"))
else:
f_btn.write("{0:2s}".format("F"))
if self.parent.dsp != None:
f_btn.write("{0:2s}".format("T"))
else:
f_btn.write("{0:2s}".format("F"))
if self.parent.ssm != None:
f_btn.write("{0:2s}".format("T"))
else:
f_btn.write("{0:2s}".format("F"))
if self.parent.rct != None:
f_btn.write("{0:2s}".format("T"))
else:
f_btn.write("{0:2s}".format("F"))
if self.parent.gcg != None:
f_btn.write("{0:2s}".format("T"))
else:
f_btn.write("{0:2s}".format("F"))
f_btn.write("\n")
# A6
self.laycon.set_fmtin("(40I2)")
f_btn.write(self.laycon.string)
# A7
f_btn.write(self.delr.get_file_entry())
# A8
f_btn.write(self.delc.get_file_entry())
# A9
f_btn.write(self.htop.get_file_entry())
# A10
f_btn.write(self.dz.get_file_entry())
# A11
f_btn.write(self.prsity.get_file_entry())
# A12
f_btn.write(self.icbund.get_file_entry())
# A13
# Starting concentrations
for s in range(len(self.sconc)):
f_btn.write(self.sconc[s].get_file_entry())
# A14
f_btn.write(f"{self.cinact:10.0E}{self.thkmin:10.2E}\n")
# A15
f_btn.write(
f"{self.ifmtcn:10d}{self.ifmtnp:10d}{self.ifmtrf:10d}{self.ifmtdp:10d}"
)
if self.savucn == True:
ss = "T"
else:
ss = "F"
f_btn.write(f"{ss:>10s}\n")
# A16, A17
if self.timprs is None:
f_btn.write(f"{self.nprs:10d}\n")
else:
f_btn.write(f"{len(self.timprs):10d}\n")
timprs = Util2d(
self.parent,
(len(self.timprs),),
np.float32,
self.timprs,
name="timprs",
fmtin="(8G10.4)",
)
timprs.format.fortran = "(8G10.4)"
f_btn.write(timprs.string)
# A18, A19
if self.obs is None:
f_btn.write(f"{0:10d}{self.nprobs:10d}\n")
else:
nobs = self.obs.shape[0]
f_btn.write(f"{nobs:10d}{self.nprobs:10d}\n")
for i in range(nobs):
f_btn.write(
"{0:10d}{1:10d}{2:10d}\n".format(
self.obs[i, 0] + 1,
self.obs[i, 1] + 1,
self.obs[i, 2] + 1,
)
)
# A20 CHKMAS, NPRMAS
if self.chkmas == True:
ss = "T"
else:
ss = "F"
f_btn.write(f"{ss:>10s}{self.nprmas:10d}\n")
# A21, 22, 23 PERLEN, NSTP, TSMULT
for t in range(self.nper):
s = f"{self.perlen[t]:10G}{self.nstp[t]:10d}{self.tsmult[t]:10G}"
if self.ssflag is not None:
s += " " + self.ssflag[t]
s += "\n"
f_btn.write(s)
f_btn.write(
"{0:10.4G}{1:10d}{2:10.4G}{3:10.4G}\n".format(
self.dt0[t],
self.mxstrn[t],
self.ttsmult[t],
self.ttsmax[t],
)
)
f_btn.close()
return
[docs] @classmethod
def load(cls, f, model, ext_unit_dict=None):
"""
Load an existing package.
Parameters
----------
f : filename or file handle
File to load.
model : model object
The model object (of type :class:`flopy.mt3d.mt.Mt3dms`) to
which this package will be added.
ext_unit_dict : dictionary, optional
If the arrays in the file are specified using EXTERNAL,
or older style array control records, then `f` should be a file
handle. In this case ext_unit_dict is required, which can be
constructed using the function
:class:`flopy.utils.mfreadnam.parsenamefile`.
Returns
-------
btn : Mt3dBtn object
Mt3dBtn object.
Examples
--------
>>> import flopy
>>> mt = flopy.mt3d.Mt3dms()
>>> btn = flopy.mt3d.Mt3dBtn.load('test.btn', mt)
"""
openfile = not hasattr(f, "read")
if openfile:
filename = f
f = open(filename, "r")
# A1
if model.verbose:
print(" loading COMMENT LINES A1 AND A2...")
line = f.readline()
if model.verbose:
print("A1: ".format(line.strip()))
# A2
line = f.readline()
if model.verbose:
print("A2: ".format(line.strip()))
# New keyword options in MT3D-USGS are found here
line = f.readline()
m_arr = line.strip().split()
# Set default values for the keywords
MFStyleArr = False
DRYCell = False
Legacy99Stor = False
FTLPrint = False
NoWetDryPrint = False
OmitDryBud = False
AltWTSorb = False
if (
m_arr[0].strip().isdigit() is not True
): # If m_arr[0] is not a digit, it is a keyword
if model.verbose:
print(f" loading optional keywords: {line.strip()}")
for i in range(0, len(m_arr)):
if m_arr[i].upper() == "MODFLOWSTYLEARRAYS":
MFStyleArr = True
model.array_format = None
model.free_format = True
if m_arr[i].upper() == "DRYCELL":
DRYCell = True
if m_arr[i].upper() == "LEGACY99STORAGE":
Legacy99Stor = True
if m_arr[i].upper() == "FTLPRINT":
FTLPrint = True
if m_arr[i].upper() == "NOWETDRYPRINT":
NoWetDryPrint = True
if m_arr[i].upper() == "OMITDRYCELLBUDGET":
OmitDryBud = True
if m_arr[i].upper() == "ALTWTSORB":
AltWTSorb = True
elif model.verbose:
print(" optional keywords not identifed/loaded")
# A3
if model.verbose:
print(" loading NLAY, NROW, NCOL, NPER, NCOMP, MCOMP...")
if m_arr[0].isdigit() is False:
line = f.readline()
nlay = int(line[0:10])
nrow = int(line[10:20])
ncol = int(line[20:30])
nper = int(line[30:40])
try:
ncomp = int(line[40:50])
except:
ncomp = 1
try:
mcomp = int(line[50:60])
except:
mcomp = 1
if model.verbose:
print(f" NLAY {nlay}")
print(f" NROW {nrow}")
print(f" NCOL {ncol}")
print(f" NPER {nper}")
print(f" NCOMP {ncomp}")
print(f" MCOMP {mcomp}")
if model.verbose:
print(" loading TUNIT, LUNIT, MUNIT...")
line = f.readline()
tunit = line[0:4]
lunit = line[4:8]
munit = line[8:12]
if model.verbose:
print(f" TUNIT {tunit}")
print(f" LUNIT {lunit}")
print(f" MUNIT {munit}")
if model.verbose:
print(" loading TRNOP...")
trnop = f.readline()[:20].strip().split()
if model.verbose:
print(f" TRNOP {trnop}")
if model.verbose:
print(" loading LAYCON...")
laycon = Util2d.load_txt((nlay,), f, np.int32, "(40I2)")
if model.verbose:
print(f" LAYCON {laycon}")
if model.verbose:
print(" loading DELR...")
delr = Util2d.load(
f,
model,
(ncol,),
np.float32,
"delr",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" DELR {delr}")
if model.verbose:
print(" loading DELC...")
delc = Util2d.load(
f,
model,
(nrow,),
np.float32,
"delc",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" DELC {delc}")
if model.verbose:
print(" loading HTOP...")
htop = Util2d.load(
f,
model,
(nrow, ncol),
np.float32,
"htop",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" HTOP {htop}")
if model.verbose:
print(" loading DZ...")
dz = Util3d.load(
f,
model,
(nlay, nrow, ncol),
np.float32,
"dz",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" DZ {dz}")
if model.verbose:
print(" loading PRSITY...")
prsity = Util3d.load(
f,
model,
(nlay, nrow, ncol),
np.float32,
"prsity",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" PRSITY {prsity}")
if model.verbose:
print(" loading ICBUND...")
icbund = Util3d.load(
f,
model,
(nlay, nrow, ncol),
np.int32,
"icbund",
ext_unit_dict,
array_format="mt3d",
)
if model.verbose:
print(f" ICBUND {icbund}")
if model.verbose:
print(" loading SCONC...")
kwargs = {}
sconc = Util3d.load(
f,
model,
(nlay, nrow, ncol),
np.float32,
"sconc1",
ext_unit_dict,
array_format="mt3d",
)
if ncomp > 1:
for icomp in range(2, ncomp + 1):
name = f"sconc{icomp}"
if model.verbose:
print(f" loading {name}...")
u3d = Util3d.load(
f,
model,
(nlay, nrow, ncol),
np.float32,
name,
ext_unit_dict,
array_format="mt3d",
)
kwargs[name] = u3d
if model.verbose:
print(f" SCONC {sconc}")
if model.verbose:
print(" loading CINACT, THCKMIN...")
line = f.readline()
cinact = float(line[0:10])
try:
thkmin = float(line[10:20])
except:
thkmin = 0.01
if model.verbose:
print(f" CINACT {cinact}")
print(f" THKMIN {thkmin}")
if model.verbose:
print(" loading IFMTCN, IFMTNP, IFMTRF, IFMTDP, SAVUCN...")
line = f.readline()
ifmtcn = int(line[0:10])
ifmtnp = int(line[10:20])
ifmtrf = int(line[20:30])
ifmtdp = int(line[30:40])
savucn = False
if "t" in line[40:50].lower():
savucn = True
if model.verbose:
print(f" IFMTCN {ifmtcn}")
print(f" IFMTNP {ifmtnp}")
print(f" IFMTRF {ifmtrf}")
print(f" IFMTDP {ifmtdp}")
print(f" SAVUCN {savucn}")
if model.verbose:
print(" loading NPRS...")
line = f.readline()
nprs = int(line[0:10])
if model.verbose:
print(f" NPRS {nprs}")
timprs = None
if nprs > 0:
if model.verbose:
print(" loading TIMPRS...")
timprs = Util2d.load_txt((nprs,), f, np.float32, "(8F10.0)")
if model.verbose:
print(f" TIMPRS {timprs}")
if model.verbose:
print(" loading NOBS, NPROBS...")
line = f.readline()
nobs = int(line[0:10])
try:
nprobs = int(line[10:20])
except:
nprobs = 1
if model.verbose:
print(f" NOBS {nobs}")
print(f" NPROBS {nprobs}")
obs = None
if nobs > 0:
if model.verbose:
print(" loading KOBS, IOBS, JOBS...")
obs = []
for l in range(nobs):
line = f.readline()
k = int(line[0:10])
i = int(line[10:20])
j = int(line[20:30])
obs.append([k, i, j])
obs = np.array(obs) - 1
if model.verbose:
print(f" OBS {obs}")
if model.verbose:
print(" loading CHKMAS, NPRMAS...")
line = f.readline()
chkmas = False
if "t" in line[0:10].lower():
chkmas = True
try:
nprmas = int(line[10:20])
except:
nprmas = 1
if model.verbose:
print(f" CHKMAS {chkmas}")
print(f" NPRMAS {nprmas}")
if model.verbose:
print(
" loading PERLEN, NSTP, TSMULT, TSLNGH, DT0, MXSTRN, TTSMULT, TTSMAX..."
)
dt0, mxstrn, ttsmult, ttsmax = [], [], [], []
perlen = []
nstp = []
tsmult = []
tslngh = []
ssflag = []
for kper in range(nper):
line = f.readline()
perlen.append(float(line[0:10]))
nstp.append(int(line[10:20]))
tsmult.append(float(line[20:30]))
sf = " "
ll = line[30:].strip().split()
if len(ll) > 0:
if "sstate" in ll[0].lower():
sf = "SState"
ssflag.append(sf)
if tsmult[-1] <= 0:
t = Util2d.load_txt((nstp[-1],), f, np.float32, "(8F10.0)")
tslngh.append(t)
raise Exception("tsmult <= 0 not supported")
line = f.readline()
dt0.append(float(line[0:10]))
mxstrn.append(int(line[10:20]))
ttsmult.append(float(line[20:30]))
ttsmax.append(float(line[30:40]))
if model.verbose:
print(f" PERLEN {perlen}")
print(f" NSTP {nstp}")
print(f" TSMULT {tsmult}")
print(f" SSFLAG {ssflag}")
print(f" TSLNGH {tslngh}")
print(f" DT0 {dt0}")
print(f" MXSTRN {mxstrn}")
print(f" TTSMULT {ttsmult}")
print(f" TTSMAX {ttsmax}")
if openfile:
f.close()
# set package unit number
unitnumber = None
filenames = [None]
if ext_unit_dict is not None:
unitnumber, filenames[0] = model.get_ext_dict_attr(
ext_unit_dict, filetype=Mt3dBtn._ftype()
)
return cls(
model,
MFStyleArr=MFStyleArr,
DRYCell=DRYCell,
Legacy99Stor=Legacy99Stor,
FTLPrint=FTLPrint,
NoWetDryPrint=NoWetDryPrint,
OmitDryBud=OmitDryBud,
AltWTSorb=AltWTSorb,
nlay=nlay,
nrow=nrow,
ncol=ncol,
nper=nper,
ncomp=ncomp,
mcomp=mcomp,
tunit=tunit,
laycon=laycon,
delr=delr,
delc=delc,
htop=htop,
dz=dz,
lunit=lunit,
munit=munit,
prsity=prsity,
icbund=icbund,
sconc=sconc,
cinact=cinact,
thkmin=thkmin,
ifmtcn=ifmtcn,
ifmtnp=ifmtnp,
ifmtrf=ifmtrf,
ifmtdp=ifmtdp,
savucn=savucn,
nprs=nprs,
timprs=timprs,
obs=obs,
nprobs=nprobs,
chkmas=chkmas,
nprmas=nprmas,
perlen=perlen,
nstp=nstp,
tsmult=tsmult,
ssflag=ssflag,
dt0=dt0,
mxstrn=mxstrn,
ttsmult=ttsmult,
ttsmax=ttsmax,
unitnumber=unitnumber,
filenames=filenames,
**kwargs,
)
@staticmethod
def _ftype():
return "BTN"
@staticmethod
def _defaultunit():
return 31
@staticmethod
def _reservedunit():
return 1